IVF TECH, multichamber IVF incubators

In Durviz we have one of the best models of benchtop incubators on the market: the IVF TECH multi-chamber. It is a model with remarkable improvements over other products that preceded it and that saves time in laboratories, also improving the reliability of the results obtained in the process of work related to in vitro fertilization.

So that you can get acquainted with them in Durviz we have written the following article in which we present its most outstanding features, so that you can assess if it is interesting its acquisition for your laboratory.

 

IVF TECH, multichamber incubators: Features

The IVF TECH model, one of the newest in terms of benchtop incubators is a system that stands out for its optimal performance.

 

ivf tech

For this purpose it has the following characteristics:

– Ensures safe environmental control for embryos. This ensures greater optimal growth potential due to stable environment, stable temperature and atmosphere generated by this benchtop incubator.

Each camera fits 4 plates, so a total of 16-32 plates are possible. Which means gaining in efficiency and performance in everyday work.

– The chambers are heated individually. The same is true for the lower and upper pads, which are heated in a particular way.

– This system has two gas sensors in the mixing chamber to ensure optimal mixing.

– This incubator has a number of setpoints for temperature and gas, allowing you to monitor at all times the process that is taking place in the system.

– This incubator has temperature and gas offsets.

–It has a large mixing chamber for quick recovery when opening and/or closing the caps where the embryos are stored.

ivf tech

IVF TECH  has different dedicated gas sampling ports for each chamber.

Its filtered air current is HEPA VOC.

– For proper operation it does not need gas premixing, and this system has a built-in gas mixer for CO2 and N2.

– It has low pressure CO2 N2 inlet gases.

–In order to avoid an increase in the light bill, the IVF TECH  system is a low-power device in a steady state (95W) at 37 degrees Celsius.

–We can perform temperature control in a stable way, with rapid recovery.

– Stable and precise gas control is possible, making it easy to recover them quickly.

– For the development of its work the system employs low gas consumption (CO2:, 5 L / h, N2: <3.0 L / h)

– The maintenance and cleanliness of the system is essential, hence its inventors have designed procedures to carry it out effortlessly. This is possible thanks to the advanced surface treatment of the cameras, allowing for an impeccable working environment.

To make these incubators fit your work rate, they are available with 2, 4 or 6 separate compartments, multiplying their possibilities of use.

The system, in its entire weight, has an approximate weight of 56 kilograms. Although a packaging reinforcement system has been used for shipment that raises the weight of the block to 76 kilograms.

So, if you want to work with full guarantee and shorten the times of the procedures in in vitro fertilization, do not hesitate and buy in IVF TECH, one of the best bench incubators on the market. You can learn more by visiting our website.

LiliF™ COVID-19 INTRON RT-PCR Kit

Validated by the Carlos III Institute of Health (ISCIII)

Kit Real Time RT-PCR

If you are looking for a test with which you can make reliable diagnoses about diseases as serious as the one that currently affects us by COVID-19, do not hesitate and get the kit that we have in Durviz.

Se trata de una manera inmejorable de poner a la gente en conocimiento de su estado de salud o pueda detectar la presencia de este coronavirus y tomar las medidas pertinentes.

LiliF COVID-19 Kit RT-PCR (detection of genes RdRP, E, N, RNaseP) CE IVD developed by  INTRON

It should be noted that there are currently four genes in the Coronavirus family. They are known as alpha, beta, gamma and delta. Alpha and beta corona viruses can cause disease in both humans and animals, while others, such as gamma and delta coronaviruses, only infect animals.

The new coronavirus (COVID-19) belongs to those we have previously identified as beta genes. It is one of the new infectious coronaviruses that, upon contact with the human body, infects them as a pathogen of massive pneumonia that occurred in The town of Wuhan, hubei Province, China, in December 2019.

Given the severity of this disease, it is very important to diagnose the infection quickly, as there are no vaccines or antivirals approved for prophylactic or therapeutic purposes.

The kit RT-PCR  we offer in Durviz allows to detect, in real time, the new coronavirus using the RT-PCR probe method, through the reaction of the specific primer and the fluorescent probe in the sample.

RT-PCR can detect the RdRp gene and the E gene, markers for the detection of new coronaviruses, which is an important help for researchers. In addition, the N gene suggested by the U.S. CDC, and the RNaseP gene, which confirms the validity of all test reactions, are included.

With all this, the intended use of this test makes it possible to detect the presence of viruses in sputum samples in the lower airways, bronchoalveolar washing fluid, nasopharyngeal smears and oropharyngeal smears collected simultaneously in the upper airways.

Coronavirus kit detección

LiliF™ COVID-19 Kit RT-PCR Kit has been validated by the Carlos III Institute of Health (ISCIII)

LiliF COVID-19 Real-time RT-PCR Kit supplies the necessary components to perform the RT-PCR separately, being able to use the consumable selected by the user and being compatible with any thermocycler

Reference:
LiliF™ COVID-19 Real-time RT-PCR Kit 

IPH21505.50 50 Tests