Cerrar este cuadro de búsqueda.


Real Saliva Collection

Real Saliva Collection and transport device is a product that allows the collection and storage of saliva samples at room temperature. Without losing any of their composition, which is an advantage for laboratories since they must not use expensive refrigeration systems to maintain them while they do their work.

So that you know more about it, we have written this article with which we want to encourage you to try it.

Real Saliva Collection and transport device is a Real brand product designed for laboratory use. A space in which it is necessary to have practical solutions that streamline procedures without having to subject the samples to complex conservation systems.

In this sense, Real Saliva Collection and transport device has been designed for the collection and conservation of saliva samples at room temperature. And all this is done in a simple and non-invasive way. So the sample does not suffer any alteration that could change the results after the process to which it is subjected.

For this reason, the Real Saliva Collection and transport device saliva collection tube is sent to the laboratory for DNA extraction so that from then on the analysis can be done using the REALPURE SALIVA KIT or other purification kits of the mark. And it is that we have many products in this sense and you can know them through the Durviz website. In this space, we even share detailed information about the characteristics of each one of them so that you can get an idea of ​​all the applications and possibilities they offer.

Saliva samples stored with the Real Saliva Collection and transport device are stable at room temperature and keep in this way for more than 2 years. A very long time when compared to other similar products that we can find in the market and that other companies make.

How Real Saliva Collection works

To properly use the Real Saliva Collection, the steps outlined in its procedure must be scrupulously followed. Information that reaches the user in the form of a paper brochure and that we summarize below so that you can get an idea of ​​its exactness.

The steps and details that must be taken into account when using the Real Saliva Collection and transport device are the following:

  1. The person from whom a saliva sample is to be taken should not eat, chew gum, drink or smoke for 30 minutes prior to taking the sample.
  2. It is advisable to wash your mouth with water and wait for 10 minutes.
  3. To stimulate the secretion of saliva, it is convenient to rub the cheeks and brush the palate with the tongue.
  4. When we are ready to collect the sample, place the funnel in the saliva collection tube. Spit the saliva into the funnel until the liquid (not including bubbles) reaches the 2 milliliter line on the collection tube. If there is an excess of bubbles, we must remove them by gently tapping the tube on a hard surface.
  5. Remove the blue cap from the Saliva preservative solution.
  6. Add the saliva preservative solution to the collection tube.
  7. Tightly close the saliva collection tube.
  8. Shake for 15 seconds to mix.
  9. The saliva sample is from that moment preserved and ready to be stored, sent somewhere or processed.

Now that you know the product, you have to encourage yourself to try it. You will certainly not be disappointed. And if despite all this information you have any questions or want to ask us a question, do not hesitate and get in touch with us. We will be delighted to assist you.

Share the Post: