Posts

IVF TECH, multichamber IVF incubators

in

In Durviz we have one of the best models of benchtop incubators on the market: the IVF TECH multi-chamber. It is a model with remarkable improvements over other products that preceded it and that saves time in laboratories, also improving the reliability of the results obtained in the process of work related to in vitro fertilization.

So that you can get acquainted with them in Durviz we have written the following article in which we present its most outstanding features, so that you can assess if it is interesting its acquisition for your laboratory.

 

IVF TECH, multichamber incubators: Features

The IVF TECH model, one of the newest in terms of benchtop incubators is a system that stands out for its optimal performance.

 

ivf tech

For this purpose it has the following characteristics:

– Ensures safe environmental control for embryos. This ensures greater optimal growth potential due to stable environment, stable temperature and atmosphere generated by this benchtop incubator.

– Each camera fits 4 plates, so a total of 16-32 plates are possible. Which means gaining in efficiency and performance in everyday work.

– The chambers are heated individually. The same is true for the lower and upper pads, which are heated in a particular way.

– This system has two gas sensors in the mixing chamber to ensure optimal mixing.

– This incubator has a number of setpoints for temperature and gas, allowing you to monitor at all times the process that is taking place in the system.

– This incubator has temperature and gas offsets.

–It has a large mixing chamber for quick recovery when opening and/or closing the caps where the embryos are stored.

ivf tech

– IVF TECH  has different dedicated gas sampling ports for each chamber.

– Its filtered air current is HEPA VOC.

– For proper operation it does not need gas premixing, and this system has a built-in gas mixer for CO2 and N2.

– It has low pressure CO2 N2 inlet gases.

–In order to avoid an increase in the light bill, the IVF TECH  system is a low-power device in a steady state (95W) at 37 degrees Celsius.

–We can perform temperature control in a stable way, with rapid recovery.

– Stable and precise gas control is possible, making it easy to recover them quickly.

– For the development of its work the system employs low gas consumption (CO2:, 5 L / h, N2: <3.0 L / h)

– The maintenance and cleanliness of the system is essential, hence its inventors have designed procedures to carry it out effortlessly. This is possible thanks to the advanced surface treatment of the cameras, allowing for an impeccable working environment.

To make these incubators fit your work rate, they are available with 2, 4 or 6 separate compartments, multiplying their possibilities of use.

The system, in its entire weight, has an approximate weight of 56 kilograms. Although a packaging reinforcement system has been used for shipment that raises the weight of the block to 76 kilograms.

So, if you want to work with full guarantee and shorten the times of the procedures in in vitro fertilization, do not hesitate and buy in IVF TECH, one of the best bench incubators on the market. You can learn more by visiting our website.

ivf tech

IVF Tech available in Durviz

in

IVF Tech: now available in Durviz

You can now buy the assisted reproduction products of the prestigious German brand IVF Tech. A good news for those who develop their activity in this area, since their proposals facilitate the correct handling of samples as well as the proper growth of gametes and embryos. As the managers of the company explain on their website explaining their objective as an economic entity and their involvement in assisted reproduction procedures: “IVF Tech’s mission is to provide and ensure the best customized solutions for its In Vitro Fertilization laboratory; and provide a safe atmosphere with reliable temperature, humidity and CO2 balance. Give our customers the best service and quality in everything we do. “

Productos IFV Tech

In Durviz you will find some of the star products of the IFV Tech company. The most outstanding are:

         1. Incubator for In Vitro Fertilization.

These are high quality tabletop consumables that have been developed as multi-chamber incubators, which are available in several versions. You can buy them with 2, 4 or 6 independent cameras, depending on your needs. Its main quality is that they allow the safe control of the environment for the embryos offering them stability. This allows an optimal growth of the same. For this purpose, it has two gas sensors in the mixing chamber (CO2 + O2) to guarantee an optimal mix.

Each of the chambers that make up the incubator is heated individually, thanks to lower and upper pads that are individually heated. To control the temperature these incubators have a large mixing chamber for a quick recovery when opening and / or closing the covers of the same.

At this point it is also necessary to add that each camera adapts to a total of four plates, so that in total 16-32 plates are possible.

It is an incubator of low energy consumption in a stationary state. And for its operation does not need to perform a premix of gas, as it has a built-in gas mixer for CO2 and N2. Which is an interesting advantage for professionals who work with them daily.

 

Its maintenance is very simple since its cleaning is carried out effortlessly thanks to the advanced treatment that has been carried out on the surface of the cameras, which allows an impeccable work environment.

 

         2. Gas mixer system for incubators.

It is a system for mixing gases to control the environment while developing embryos.

It has a circulation pump that allows an optimal mixing and distribution of the gas, at an adjustable speed. In addition, it has a series of color coded alarms that allow detecting any deviation of the safety conditions and the parameters of the adjustment point. It also has a HEPA + VOC filter, which is accessible through a conveniently placed front compartment; and with gas inlet valves for CO2 or CO2 and N2.

It can be used for 4-6 2-chamber incubators.

It is a product compatible with IVF Tech brand incubators.

 

So, if you want to have the best technology for your assisted reproduction laboratory; Do not hesitate and get some of the proposals from IVF Tech. You can develop your activity knowing at all times how is each embryo or each sample. For this you just have to enter our website and tell us how many products you want. We’ll do the rest.